Making of Ukulele9
Finished
It took 2 monthes to make through these 2 ukes.
I started ukulele making under the concept that I use remaining woods mainly. Most of woods are remainded result of my miss processing of guitar making. I think I was able to use these woods effectively.
The sound of these ukes are similar because they are made from same wood. But the right side uke has deeper body than the left uke. So, it has a little deep sound. And the other one has quick response, I think it's good for single note play.
Anyway I really like dry mahogany sound.
 | |||||
 |  |  |  |  |  |
| No.1（left） | No.2（right） | |
| Total Length | 21 | 20+1/8 |
| Body Length | 9+3/8 | 9+7/16 |
| Body Depth1(at Neck） | 1+15/16 | 2+1/8 |
| Body Depth2(at Waist） | 2+1/4 | 2+1/4 |
| Body Depth3(at Bottom） | 2+1/4 | 2+7/16 |
| Scale Length | 13+5/8 | 13+5/8 |
| Body Width1(upper part） | 4+7/8 | 4+7/8 |
| Body Width2(waist part） | 3+3/4 | 3+3/4 |
| Body Width3(lower part） | 6+3/8 | 6+3/8 |
| Neck Width1(at Nut） | 1+13/32 | 1+13/32 |
| Neck Width2(at 12th fret） | 1+13/16 | 1+13/16 |
| S.Hole diameter | 2 | 2 |